HP HSG Array Controller - Manual (Page 173)

Telnet Commands B-33
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
login
Figure B-17 shows the login command which logs in a user from a remote
host. If a user is already logged in, the command logs out the user and allow a
new user login.
admin> login
Figure B-17. login Command Example
ipAddrShow
Figure B-18 shows the ipAddrShow command which is used to display the
Switch’s IP addresses. The fields are described in Table B-8.
admin> ipAddrShow
Ethernet IP Address: 192.158.1.14
Ethernet Subnetmask: 255.255.255.0
Fibre Channel IP Address: none
Fibre Channel Subnetmask: none
Gateway Address: 192.158.1.1
value = 30 = 0x1e
Figure B-18. ipAddrShow Command Example
logout
Figure B-19 shows the logout command which logs out from a remote
session.
admin> logout
Connection closed by foreign host.
Figure B-19. logout Command Example