HP HSG Array Controller User Manual
Page 181
Telnet Commands B-41
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-9
portlogShow Command Field Descriptions
Field
Description
NOTE: Lower case entries are defined in the “cmd” section in Table 5-9. Upper case entries in the
“cmd” field are summarized in Table 5-9 and detailed in the Fibre Channel ANSI Standard (FC-PH).
Time
The event’s date and time in milliseconds.
Task
The task name that logged the event, or “interrupt” if the event was recorded
from interrupt level code.
Event
The possible Switch events include:
start
–
the Switch first starts running.
disable
–
a port is disabled.
enable
–
a port is enabled.
ioctl
–
a port I/O control is executed.
Tx
–
a frame is transmitted.
Rx
–
a frame is received.
scn
–
a state change notification is posted.
pstate
–
a port changes physical state.
ctin - a CT based requested is received
ctout - a CT based requested is transmitted
continued