Nbrstateshow – HP HSG Array Controller User Manual
Page 230
B-90 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
nbrStateShow
Figure B-59 and Figure B-60 shows the
nbrStateShow
command which
displays neighbor's summary information. This information can also be
retrieved using
interfaceShow
. The command provides essential
information to determine the Fabric topology in a concise way. By using this
command, you can discover the domain ID of all Switches directly connected
to the local Switch, and the port number on the local and remote Switch. The
fields are described in Table B-19.
With no parameters it shows the neighbor's state summary for all the neighbors
instead of neighbor connected to port 0 only.
The command syntax is nbrStateShow to list all neighbors.
admin> nbrStateShow
Local Domain ID: 1
Local Port Domain Remote Port State
-------------------------------------------------------
0 2 0 NB_ST_FULL
1 2 1 NB_ST_FULL
2 2 2 NB_ST_FULL
4 5 4 NB_ST_FULL
5 5 5 NB_ST_FULL
7 5 6 NB_ST_FULL
value = 1 = 0x1
Figure B-58. nbrStateShow Command Example