HP HSG Array Controller - Manual (Page 28)

Installing the Switch 2-9
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments: V1.6 OEM Source
Part Number: AA-RHBYA-TE 135267-001 File Name: c-ch2 Installing the Switch Last Saved On: 4/7/99 1:45 PM
Attaching the Slide Brackets to the Switch
You attach the slide brackets to the Switch using different bracket mounting
holes for a rack-front installation than for a rack-rear installation. Use Figure
2–7 or Figure 2–8 to guide you in installing the slide brackets on the Switch;
attach each bracket with two SEMS 10–32 x 9/32 pan–head screws.
CAUTION: Make sure you use the right screws. If you use screws longer than
9/32", you can damage the Switch.
SHR-1385
Figure 2-7. Attaching the Slide Brackets, Rack-Front Installation
SHR-1389
Figure 2-8. Attaching the Slide Brackets, Rack-Rear Installation