American Fibertek SM8P-SFP - Manual (Page 111)

101 Rev.A1
18-May-11
Function name:
SNMPv3 Communities Configuration
Function description:
The function is used to configure SNMPv3 communities. The Community and
UserName is unique. To create a new community account, please check <Add new
community> button, and enter the account information then check <Save>. Max
Group Number : 4.
Fig. 3-63-1 Community setting
Fig. 3-63-2 Add new Community setting
Parameters description:
Delete:
Check <Delete> entry then check <Save> button, the entry will be delete.
Community:
The length of “Community” string is restricted to 1-32.
UserName:
The UserName access string to permit acccess to SNMPv3 agent. The
length of “UserName” string is restricted to 1-32.
Source IP:
SNMP access source address.
Source Mask:
SNMP access source address mask.