American Fibertek SM8P-SFP - Manual (Page 303)

277 Rev.A1
18-May-11
Description:
To set per port admin edge
Argument:
<port range> syntax: 1,5-7, available from 1 to 8
<admin edge> : 0->non-edge port,1->edge ports
Possible value:
<port range> syntax: 1,5-7, available from 1 to 8
<admin edge> : 0->non-edge port,1->edge ports
Example:
SM8P-SFP(mstp)# set p-edge 10-12 0 SM8P-
SFP(mstp)#
set p-hello
Syntax:
set p-hello <port range> <hello time>
Description:
To set per port hello time
Argument:
<port range> : syntax: 1,5-7, available from 1 to 8
<hello time> : only 1~2 are valid values
Possible value:
<port range> : syntax: 1,5-7, available from 1 to 8
<hello time> : only 1~2 are valid values
Example:
SM8P-SFP(mstp)# set p-hello 5-10 1 SM8P-
SFP(mstp)#
set p-p2p
Syntax:
set p-p2p <port range> <admin p2p>
Description:
To set per port admin p2p
Argument:
<port range> syntax: 1,5-7, available from 1 to 8
<admin p2p> : Admin point to point, <auto|true|false>
Possible value:
<port range> syntax: 1,5-7, available from 1 to 8
<admin p2p> : Admin point to point, <auto|true|false>
Example:
SM8P-SFP(mstp)# set p-p2p 8-10 auto SM8P-
SFP(mstp)#
set priority
Syntax:
set priority <instance-id><Instance Priority>
Description:
To set instance priority