American Fibertek SM8P-SFP - Manual (Page 233)

221 Rev.A1
18-May-11
4-2-1. Global Commands of CLI
end
Syntax:
end
Description:
Back to the top mode.
When you enter this command, your current position would move to the top mode. If
you use this command in the top mode, you are still in the position of the top mode.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP# alarm
SM8P-SFP(alarm)# events
SM8P-SFP(alarm-events)#end
SM8P-SFP#
exit
Syntax:
exit
Description:
Back to the previous mode.
When you enter this command, your current position would move back to the
previous mode. If you use this command in the top mode, you are still in the position
of the top mode.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP# trunk
SM8P-SFP(trunk)# exit SM8P-SFP#