American Fibertek SM8P-SFP - Manual (Page 301)

275 Rev.A1
18-May-11
Argument:
<Max Age> : available from 6 to 40. Recommended value is 20
<Forward Delay(sec)> : available from 4 to 30. Recommended value is 15
<Max Hops> : available from 6 to 40. Recommended value is 20
Possible value:
<Max Age> : available from 6 to 40. Recommended value is 20
<Forward Delay(sec)> : available from 4 to 30. Recommended value is 15
<Max Hops> : available from 6 to 40. Recommended value is 20
Example:
SM8P-SFP(mstp)# set config 20 15 20 SM8P-
SFP(mstp)#
set msti-vlan
Syntax:
set msti-vlan <instance-id><vid-string>
Description:
To map Vlan ID(s) to an MSTI
Argument:
<instance-id> : MSTI id available from 1 to 4095
<vid-string> : syntax example: 2.5-7.100-200
Possible value:
<instance-id> : available from 1 to 4094
Example:
SM8P-SFP(mstp)# set msti-vlan 2 2.5
msti 2 had been successfully created and(or)
vlan(s) have been added to map to this msti.
SM8P-SFP(mstp)#
set p-cost
Syntax:
set p-cost <instance_id> <port range> <path cost>
Description:
To set port path cost per instance
Argument:
<port range> syntax: 1,5-7, available from 1 to 8
<path cost> : 0, 1-200000000. The value zero means auto status
Possible value:
<port range> : available from 1 to 8
<path cost> : The value zero means auto status, 0-2000000000
Example:
SM8P-SFP(mstp)# set p-cost 2 6-8 0 SM8P-
SFP(mstp)#
set p-edge
Syntax: