American Fibertek SM8P-SFP - Manual (Page 202)

Rev.A1
18-May-11 192
3-16-4 IGMP Group Allow
Function name:
IGMP Group Allow
Function description:
The Group Allow function allows the Multicast VLAN Registration to set up the
IP multicast group filtering conditions. IGMP join behavior that meet the items
you set up will be joined or formed the multicast group.
Fig. 3-164-3 MVID Group Allow configuration
Parameter description:
IP Address Range:
The switch supports two kinds of options for managed valid IP range,
including “Any” and “Custom”. Default is “Any”. In case that” Custom”
had been chosen, you can assigned effective IP range. The valid range
is 224.0.0.0~239.255.255.255.
MVID:
The switch supports two kinds of options for managed valid MVID,
including “Any” and “Custom”. Default is “Any”. When you choose
“Custom”, you can fill in VID number. The valid VID range is 1~4094.