American Fibertek SM8P-SFP - Manual (Page 355)

311 Rev.A1
18-May-11
enable sym-vlan
Syntax:
enable sym-vlan <range>
Description:
To drop frames from the non-member port.
Argument:
<range> : which port(s) you want to set, syntax 1,5-7, available from 1 to 8
Possible value:
<range>: 1 to 8
Example:
SM8P-SFP(vlan)# enable sym-vlan 5-8
set mode
Syntax:
set mode < port | tag > [up-link]
Description:
To set switch VLAN mode, including port-based and tag-based modes.
Argument:
<tag>: set tag-based vlan
<port>: set port-based vlan
Possible value:
< port | tag >: port,tag
Example:
SM8P-SFP(vlan)# set mode
Usage: set mode <port|tag>
tag: set tag-based vlan port:
set port-based vlan
SM8P-SFP(vlan)#
set double-tag
Syntax:
set double-tag <range> <0|1|2>
Description:
To set double-tag per port and enable Q-in-Q VLAN function on switch.
Argument:
<range >: 1,5-7, available from 1 to 8
0: disable
1: service provider port
2: customer port
Possible value:
<range>: 1 to 8
Example:
SM8P-SFP(vlan)# set double-tag 3 1 SM8P-
SFP(vlan)#