American Fibertek SM8P-SFP - Manual (Page 204)

Rev.A1
18-May-11 194
3-16-6 MVR
Function name:
MVR configuration (Multicast VLAN Registration)
Function description:
Multicast VLAN Registration (MVR) routes packets received in a multicast
source VLAN to one or more receive VLANs. Clients are in the receive VLANs
and the multicast server is in the source VLAN. Multicast routing has to be
disabled when MVR is enabled. Refer to the configuration guide at
Understanding Multicast VLAN Registration for more information on MVR.
Note: The function must using with tag base VLAN mode.
Fig. 3-164-1 MVR configuration
Parameter description:
MVR Enable:
To set the MVR function enable .
Host Time Out:
To set the MVR function enable and the Host packet received by Switch
timeout period. The unit is second and time range is from 1 to 65535.
The default is 125 seconds.
Fast Leave:
To set which port want to enable the Fast leave mode with IGMP
snooping mode.