American Fibertek SM8P-SFP - Manual (Page 121)

111 Rev.A1
18-May-11
3-8-3.Access Control List
Function name:
ACL Rate Limiter Configuration
Function description:
The switch ACL function support up to 128 Access Control Entries (ACEs),
using the shared 128 ACEs for ingress classification. You can create an ACE
and assign this ACE for each port with <Any> or assign this ACE for a policy
or assign this ACE for a port. There are 8 policies, each port can select one of
policy, then decides which of the Permit/Deny, Rate Limitation and Port Copy
actions would take according to the ACL configuration packet’s IPv4,
EtherType, ARP Protocol, MAC Parameters and VLAN parameters.
Fig. 3-66 Ingress Port
Insert an entry
Edit this entry
Move up this entry
Move down this entry
Parameter description:
Ingress Port:
Configurable Range: Any / Policy 1-8 / Port 1-8
Any: Apply this ACE rule for each port ingress classification
Policy 1-8: Apply this ACE rule for specific policy
Port 1-8: Apply this ACE rule for specific port ingress classification