American Fibertek SM8P-SFP - Manual (Page 278)

Rev.A1
18-May-11 260
 LLDP
<<set clear>>
set
Syntax:
set clear
Description:
To set clear LLDP entry.
Argument:
None
Possible value:
<clear> : set clear LLDP
<clear counter> : set clear LLDP counter
Example:
SM8P-SFP(lldp)# set clear SM8P-
SFP(lldp)#
set mode
Syntax:
set mode <mode> <range>
Description:
To set LLDP mode
Argument:
tx and rx = 1
tx only = 2
rx only = 3
disabled = 0
port range syntax : 1,5-7, available from 1 to 8
Possible value:
<Port range> : 1 to 8
Example:
SM8P-SFP(lldp)# set mode 1 15 SM8P-SFP(lldp)#
set notification
Syntax:
set notification <state> <range>
Description:
To set LLDP notification
Argument:
enable = 1
disable = 2
Possible value:
<Port range> : syntax : 1,5-7, available from 1 to 8
Example: