Mirror – American Fibertek SM8P-SFP User Manual
Page 297
271
Rev.A1
18-May-11
mirror
set mirror
Syntax:
set mirror < #>
Description:
To set mirror port and enable/disable mirror function
Argument:
<#>: port, available from 1 to 8 and 0.
1 to 8: available port number
0: disable mirror function
Possible value:
<#>: 1 to 8
Example:
SM8P-SFP(mirror)# set mirror 2
set monitor-destination
Syntax:
set monitor-destination <range>
Description:
To set monitor destination port. The packets sent by this port will be copied to the
monitoring port.
Argument:
<range>: the port that is chosen for monitored port of the mirror function,
syntax 1,5-7, available from 1 to 8
Possible value:
<range>: 1 to 8
Example:
SM8P-SFP(mirror)# set monitor-destination 2-15 SM8P-SFP(mirror)#
show
2
V
3
V
4
V
5
V
6
V
7
V
8
V
set monitor-source
Syntax:
set monitor-source <range>
Description:
To set up the monitoring port of the mirror function. User can observe the packets
that the monitored port received via this port.