American Fibertek SM8P-SFP - Manual (Page 340)

Rev.A1
18-May-11 298
 stp
MCheck
Syntax:
MCheck <range>
Description:
To force the port to transmit RST BPDUs.
Argument:
<range>: syntax 1,5-7, available from 1 to 8
Possible value:
<range>: 1 to 8
Example:
SM8P-SFP(stp)# Mcheck 1-8
disable
Syntax:
disable
Description:
To disable the STP function.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP(stp)# disable
enable
Syntax:
enable
Description:
To enable the STP function.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP(stp)# enable
set config
Syntax:
set config <Bridge Priority> <Hello Time> <Max. Age> <Forward Delay>
Description:
To set up the parameters of STP.
Argument:
<Bridge Priority>:priority must be a multiple of 4096, available from 0 to 61440.
<Hello Time>: available from 1 to 10.