American Fibertek SM8P-SFP - Manual (Page 350)

Rev.A1
18-May-11 308
<port-range>: 1 to 8
Example:
SM8P-SFP(trunk)# del trunk 1
set priority
Syntax:
set priority <range>
Description:
To set up the LACP system priority.
Argument:
<range>: available from 1 to 65535.
Possible value:
<range>: 1 to 65535, default: 32768
Example:
SM8P-SFP(trunk)# set priority 33333
set trunk
Syntax:
set trunk <port-range> <method> <group> <active LACP>
Description:
To set up the status of trunk, including the group number and mode of the trunk as
well as LACP mode.
Argument:
<port-range> : port range, syntax 1,5-7, available from 1 to 8
<method>:
static : adopt the static link aggregation
lacp : adopt the dynamic link aggregation- link aggregation control protocol
<group>: 1-8.
<active LACP>:
active : set the LACP to active mode
passive : set the LACP to passive mode
Possible value:
<port-range> : 1 to 8
<method>: static / lacp
<group>: 1-8.
<active LACP>: active / passive
Example:
SM8P-SFP(trunk)# set trunk 1-4 lacp 1 active
show aggtr-view
Syntax:
show aggtr-view
Description:
To display the aggregator list.
Argument:
None.
Possible value:
None.