American Fibertek SM8P-SFP - Manual (Page 51)

43 Rev.A1
18-May-11
Function name:
Management Security Configuration
Function description:
The switch offers Management Security Configuration function. With this
function, the manager can easily control the mode that the user connects to
the switch. According to the mode, users can be classified into two types:
Those who are able to connect to the switch (Accept) and those who are
unable to connect to the switch (Deny). Some restrictions also can be placed
on the mode that the user connect to the switch, for example, we can decide
that which VLAN VID is able to be accepted or denied by the switch, the IP
range of the user could be accepted or denied by the switch, the port that the
user is allowed or not allowed to connect with the switch, or the way of
controlling and connecting to the switch via Http, Telnet or SNMP.
Fig. 3-9
Parameter description:
Add:
Fig. 3-10
A new entry of Management Security Configuration can be created after
the parameters as mentioned above had been setup and then press
<Add> button. Of course, the existed entry also can be modified by
pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from
the management security table.