American Fibertek SM8P-SFP - Manual (Page 242)

Rev.A1
18-May-11 230
<secret-key> : set up the value of secret-key, and the length of secret-key is
from 1 to 31
Possible value:
<udp-port > : 1~65535, default is 1812
Example:
SM8P-SFP(802.1X)# set auth-server 192.168.1.7715 1812 WinRadius
set suppTimeout
Syntax:
set suppTimeout <port-range> <value>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<value> : timer , range 1-65535
Possible value:
<port range> : 1 to 8
<value> : 1-65535, default is 30
Example:
SM8P-SFP(802.1X)# set suppTimeout 2 30
set txPeriod
Syntax:
set txPeriod <port-range> <value>
Description:
A timer used by the Authenticator PAE state machine to determine when an EAPOL
PDU is to be transmitted
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<value> : timer , range 1-65535
Possible value:
<port range> : 1 to 8
<value> : 1-65535, default is 30
Example:
SM8P-SFP(802.1X)# set txPeriod 2 30
show status
Syntax:
show status
Description:
To display the mode of each port.
Argument:
None