American Fibertek SM8P-SFP - Manual (Page 210)

Rev.A1
18-May-11 200
3-17-2 Email
Function name:
Email Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via email. An email address has to be set in the web page of
alarm configuration (See Fig. 3-61). Then, user can read the trap information
from the email. This function provides 6 email addresses at most. The 24
different trap events will be sent out to SNMP Manager when trap event
occurs. After ticking trap events, you can fill in your desired email addresses.
Then, please click <Apply> button to complete the alarm configuration. It will
take effect in a few seconds.
Fig. 3-166
Parameter description:
Email:
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Sender: To set the mail sender name
Return-Path: To set the mail return-path as sender mail address.
Email Address 1 – 6: email address that would like to receive the
alarm message.