American Fibertek SM8P-SFP - Manual (Page 299)

273 Rev.A1
18-May-11
<range>: the monitoring port that is chosen for the mirror function. Only one port is
allowed to configure, available from 1 to 8
Possible value:
<range>:1 to 8
Example:
SM8P-SFP(mirror)# set monitor-source 18
SM8P-SFP(mirror)#show
Port to mirror to: 1
Port Source Enable Destination Enable
2 V
3 V
4 V
5 V
6 V
7 V
8 V
SM8P-SFP(mirror)#
show
Syntax:
show
Description:
To display the setting status of mirror configuration.
Argument:
None
Possible value:
None
Example:
SM8P-SFP(mirror)#show Port
to mirror to: 1
Port Source Enable Destination Enable
2 V
3 V
4 V
5 V
6 V
7 V
8 V
SM8P-SFP(mirror)#