American Fibertek SM8P-SFP User Manual
Page 211
201
Rev.A1
18-May-11
3-18. DHCP Snooping
DHCP Snooping
DHCP Snooping State
DHCP Snooping Entry
DHCP Snooping Client
Fig.3-62
3-18-1. DHCP Snooping State
Function name:
DHCP Snooping State
Function description:
The addresses assigned to DHCP clients on unsecure ports can be carefully
controlled using the dynamic bindings registered with DHCP Snooping. DHCP
snooping allows a switch to protect a network from rogue DHCP servers or
other devices which send port-related information to a DHCP server. This
information can be useful in tracking an IP address back to a physical port.
Fig. 3-17-1 DHCP Snooping State
Parameter description:
DHCP Snooping state: The parameter which set to disabled or enabled
the DHCP snooping function on the switch, the
default is Disabled.
Note: To click ” Apply” when you finish the configuration.