American Fibertek SM8P-SFP - Manual (Page 200)

Rev.A1
18-May-11 190
General Query Max Response Time :
To set the max response code value of the general query packet .
(Available : 1~25 secs)
Last Member Query Count :
To set the frequency. When Switch received IGMP leave then switch
send specific query frequency. (Available : 1~16 secs)
Last Member Query Interval :
To set the frequency what the Switch send specific query period time.
(Available : 1~25 secs)
Last Member Query Max Response Time :
To set the max response code value in the specific query packet
(Available : 1~25 secs)
Update Interval of Router Port :
To set the period time what interface ever received IGMP query packet.
(Available : 1~3600 secs)
Router Ports:
To set the interface what connect to IGMP Router, and it is the switch
what it send/receive IGMP report/leave port. Router ports may be only or
more than one.
Apply:
To save all configuration.