American Fibertek SM8P-SFP - Manual (Page 267)

251 Rev.A1
18-May-11
Argument:
<port>: port range, syntax 1,5-7, available from 1 to 8
<0>: set restricted normal
<1>: set restricted fixed
<2>: set restricted forbidden
Possible value:
<port>: 1 to 8
< 0| 1| 2>: normal, fixed or forbidden
Example:
SM8P-SFP(gvrp)# set restricted 1-8 1 SM8P-
SFP(gvrp)# show config
GVRP state: Enable
Port Join Time Leave Time LeaveAll Time Applicant Registrar Restricted
---- --------- ---------- ------------- --------------- --------- ----------
1 20 60 1000 Normal Normal Enable
2 20 60 1000 Normal Normal Enable
3 20 60 1000 Normal Normal Enable
4 20 60 1000 Normal Normal Enable
5 20 60 1000 Normal Normal Enable
6 20 60 1000 Normal Normal Enable
7 20 60 1000 Normal Normal Enable
8 20 60 1000 Normal Normal Enable
set timer
Syntax:
set timer <port> <JoinTime> <leaveTime> <leaveAllTime>
Description:
To set gvrp join time, leave time, and leaveall time for each port.
Argument:
<port> : port range, syntax 1,5-7, available from 1 to 8
<JoinTime>: join timer, available from 20 to 100
<LeaveTime>: leave timer, available from 60 to 300
<LeaveAllTime>: leaveall timer, available from 1000 to 5000
Leave Time must equal double Join Time at least.
Possible value:
<port> : 1 to 8
<JoinTime>: 20 to 100
<LeaveTime>: 60 to 300
<LeaveAllTime>: 1000 to 5000
Example:
SM8P-SFP(gvrp)# set timer 2-8 25 80 2000
show
Syntax:
show
Description:
To display the gvrp configuration.
Argument:
None