American Fibertek SM8P-SFP - Manual (Page 174)

Rev.A1
18-May-11 164
Per Trunking Group supports a maximum of 4 ready member-ports. Please
note that some decisions will automatically be made by the system while you are
configuring your trunking ports. Some configuration examples are listed below:
a) 8 ports have already used Static Trunk Group ID 1, the 13th port
willing to use the same Static Trunk Group ID will be automatically set
to use the “None” trunking method and its Group ID will turn to 0. This
means the port won’t aggregate with other ports.
b) 4 ports all use LACP Trunk Group ID 1 at most 2 ports can aggregate
together and transit into the ready state.
c) A port using the “None“ trunking method or Group ID 0 will be
automatically set to use the “None” trunking method with Group ID 0.
3-12-1.Port
Function name:
Trunk Port Setting/Status
Function description:
Port setting/status is used to configure the trunk property of each and every
port in the switch system.
Fig.3-148
Parameter description:
Port:
Port Number: 1-8