Firmware, Gvrp – American Fibertek SM8P-SFP User Manual
Page 265
249
Rev.A1
18-May-11
firmware
Upgrade
Syntax:
upgrade <ip_address> <file_path>
Description:
To set up the image file that will be upgraded.
Argument:
< ip address> : TFTP server ip address
<filepath>: upgrade file path
Possible value:
< ip address> : TFTP server ip address
<filepath>: upgrade file path
Example:
SM8P-SFP(firmware)# upgrade 192.168.2.4fgs2924R_SM8P-SFP_v2.03.img
gvrp
set state
Syntax:
set state < 0 | 1>
Description:
To disable/ enable the gvrp function.
Argument:
0 : disable the gvrp function
1 : enable the gvrp function
Possible value:
0 : disable the gvrp function
1 : enable the gvrp function
Example:
SM8P-SFP(gvrp)# set state 1
group applicant
Syntax:
group applicant <vid> <port> < 0 | 1>
Description:
To enter any of gvrp group for changing gvrp group setting. You can change the
applicant or registrar mode of existing gvrp group per port.
Argument:
<vid>: enter which gvrp group you had created, using value is vid. Available range:
1 to 4094
<port>: 1 to 8
< 0 | 1> :
Possible value:
<vid>: 1~4094
<port>: 1 to 8