American Fibertek SM8P-SFP - Manual (Page 141)

131 Rev.A1
18-May-11
MAC Parameters: (When Frame Type = ARP)
SMAC Filter:
Range: Any / Specific
Any: It is including all source MAC address
Specific: It is according to SMAC Value specific the source MAC
address
DMAC Filter:
Range: Any / MC / BC / UC
Any: It is including all destination MAC address
MC: It is including all Multicast MAC address
BC: It is including all Broadcast MAC address
UC: It is including all Unicast MAC address
MAC Parameters: (When Frame Type = IPv4)
DMAC Filter:
Range: Any / MC / BC / UC
Any: It is including all destination MAC address
MC: It is including all Multicast MAC address
BC: It is including all Broadcast MAC address
UC: It is including all Unicast MAC address
Ether Type Parameters: (When Frame Type = Ethernet Type)
EtherType Filter:
Range: Any / Specific
Any: It is including all Ethernet frame type
Specific: It is according to specific Ethernet Type Value.
Ethernet Type Value:
The Ethernet Type Range: 0x600-0xFFFF
ARP Parameters: (When Frame Type = ARP)
ARP/RARP:
Range: Any / ARP / RARP / Other
Any: Including all ARP/RARP protocol frame types
ARP: Including all ARP protocol frame types
RARP: Including all RARP frame types
Other: Including other frame types except ARP/RARP protocol
Request/Reply:
Range: Any / Request / Reply
Any: Including all ARP/RARP Request and Reply
Request: Including all ARP/RARP request frames
Reply: Including all ARP/RARP reply frames