American Fibertek SM8P-SFP - Manual (Page 199)

189 Rev.A1
18-May-11
3-16-2 IGMP Proxy
Function name:
IGMP Proxy Configuration
Function description:
IGMP proxy enables the switch to issue IGMP host messages on behalf of
hosts that the system discovered through standard IGMP interfaces. The
switch acts as a proxy for its hosts.
You enable IGMP proxy on the switch, which connects to a router closer to the
root of the tree. This interface is the upstream interface. The router on the
upstream interface should be running IGMP.
Parameter description:
IGMP Proxy Enable:
Fig. 3-163 IGMP Proxy
The function supports to enable the IGMP Proxy on Switch.
Enable:
To evoke the ” IGMP Proxy Enable” to enable IGMP Proxy on
Switch.
Default: Disable
Unregister IPMC Flooding Enable:
To enable to control the traffic doesn’t appear in the multicast table for
flooding
General Query Interval: :
To set the switch send general query period time. (Available : 1~3600
secs)
General Query Response Timeout :
To set the switch determine the client living time. (Available : 1~25 secs)