American Fibertek SM8P-SFP - Manual (Page 352)

Rev.A1
18-May-11 310
1 None 0 Active 1 Read
y
2 LACP 1 Active 2 ---
3 LACP 1 Active 3 ---
4 LACP 1 Active 4 ---
5 LACP 1 Active 5 ---
6 LACP 1 Active 6 ---
7 LACP 1 Active 7 ---
show status
Syntax:
show status
Description:
To display the aggregator status and the settings of each port.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP(trunk)# show status
Trunk Port Setting Trunk Port Status
-----------------------------------------------------------
port Method Group Active LACP Aggtregator Status
====== ======== ======= ============= ============= ========
:
 vlan
del port-group
Syntax:
del port-group <name>
Description:
To delete the port-based vlan group.
Argument:
<name>: which vlan group you want to delete.
Possible value:
<name>: port-vlan name
Example:
SM8P-SFP(vlan)# del port-group VLAN-2
del tag-group
Syntax:
del tag-group <vid>
Description:
To delete the tag-based vlan group.
Argument:
<vid>: which vlan group you want to delete, available from 1 to 4094