Avaya AP-6 - Manual (Page 124)

Interfaces
4-26 Avaya Wireless AP-4/5/6 User’s Guide
Auto Channel
Select The AP scans the area for other
Access Points and selects a free or relatively
unused communication channel. This helps
prevent interference problems and increases
network performance. By default this feature
is enabled. See
802.11a Channel
Frequencies for a list of Channels.
NOTE:
You cannot disable Auto Channel Select for 802.11a
products in Europe (
see Dynamic Frequency
Selection (DFS) for details).
Frequency
Channel When Auto Channel Select is enabled, this
field is read-only and displays the
Access Point’s current operating Channel.
When Auto Channel Select is disabled, you
can specify the Access Point’s channel. If
you decide to manually set the unit’s
Channel, ensure that nearby devices do not
use the same frequency. Available Channels
vary based on regulatory domain. See
802.11a Channel Frequencies .
Note that you cannot manually set the
channel for 802.11a products in Europe (see
Dynamic Frequency Selection (DFS) for
details).
Parameter Description
3 of 5