Avaya AP-6 - Manual (Page 171)

Management
Avaya Wireless AP-4/5/6 User’s Guide 4-73
Accessing the AP through the HTTPS interface
The user should use a SSL intelligent browser to access the AP through
the HTTPS interface. After configuring SSL, access the AP using https://
followed by the AP’s management IP address.
Telnet Configuration Settings
Setting Description
Telnet Interface
Bitmask Select the interface (Ethernet, Wireless,
All Interfaces) from which you can manage
the AP via telnet. This parameter can also
be used to Disable telnet management.
Telnet Port The default port number for Telnet
applications is 23. However, you can use
this field if you want to change the Telnet
port for security reasons (but your Telnet
application also must support the new port
number you select).
1 of 2