Avaya AP-6 - Manual (Page 419)

RAD Commands
Avaya Wireless AP-4/5/6 User’s Guide A-73
Rogue Access Point Detection (RAD) Parameters
Syntax Examples
[Device-Name]> set radstatus enable
[Device-Name]> set radscanint <15-1440>
[Device-Name]> show rad
Figure A-14. Results of “show rad” CLI command
Name Type Values Access CLI Parameter
Rogue Access
Point Detection
(RAD) Group N/A R rad
Status Integer enable
disable (default)
RW radstatus
Scan Interval Integer 15-1440 (minutes) RW radscanint