Avaya AP-6 - Manual (Page 143)

Interfaces
Avaya Wireless AP-4/5/6 User’s Guide 4-45
Multicast Rate and Distance Between APs is presented in the
following table:
The Distance Between APs must be set before the Multicast Rate,
because when you select the Distance Between APs, the appropriate
range of Multicast values automatically populates the drop-down
menu.This feature is not available if you are using an
Avaya 802.11a/b Card or a non-Avaya Wireless client with the AP.
Wireless (802.11b/g)
You can configure the following radio parameters for an 802.11b/g AP:
NOTE:
You must reboot the Access Point before any changes to these
parameters take effect.
1.0 Mbit/s 2.0 Mbits/s 5.5 Mbits/s 11 Mbits/s
Large yes yes
Medium yes yes yes
Small yes yes yes yes
Minicell yes yes yes yes
Microcell yes yes yes yes