Auto configuration parameters, Syntax examples – Avaya AP-6 User Manual
Page 388
Auto Configuration Commands
A-42 Avaya Wireless AP-4/5/6 User’s Guide
Auto Configuration Parameters
These parameters relate to the Auto Configuration feature which allows
an AP to be automatically configured by downloading a specific
configuration file from a TFTP server during the boot up process.
Syntax Examples
[Device-Name]> set autoconfigstatus <enable/disable>
[Device-Name]> set autoconfigfilename <filename>
Enter the filename of the configuration file that is used if the
AP is configured for Static IP.
[Device-Name]> set autoconfigTFTPaddr <IP address>
Enter the TFTP server address that is used if the AP is
configured for Static IP.
Name
Type
Values
Access
CLI Parameter
Auto
Configuration
Group
N/A
R
autoconfig
Auto
Configuration
Status
Integer
enable (default)
disable
RW
autoconfigstatus
Auto Config
File Name
DisplayString
User Defined
RW
autoconfigfilename
Auto Config
TFTP Server IP
Address
IpAddress
User Defined
RW
autoconfigTFTPaddr