Avaya AP-6 - Manual (Page 246)

Configure Multiple SSID/VLAN/Security Mode Entries
4-148 Avaya Wireless AP-4/5/6 User’s Guide
• Enable MAC Access Control: Check this box to enable the Control
Table.
• Operation Type: Choose between Passthru and Block. This
determines how the stations identified in the MAC Access Control
Table are filtered.
— If set to Passthru, only the addresses listed in the Control
Table will pass through the bridge.
— If set to Block, the bridge will block traffic to or from the
addresses listed in the Control Table.
• MAC Access Control Table: Click Add to create a new entry. Click
Edit to change an existing entry. Each entry contains the following
field:
— MAC Address: Enter the wireless client’s MAC address.
— Comment: Enter an optional comment such as the client’s
name.
• Status: The entry is enabled automatically when saved (so the
Status field is only visible when editing an entry). You can also
disable or delete entries by changing this field’s value.
NOTE:
For larger networks that include multiple Access Points, you may
prefer to maintain this list on a centralized location using the
MAC
Access Control by Means of RADIUS Authentication .