Avaya AP-6 - Manual (Page 369)

Accessing the AP CLI
Avaya Wireless AP-4/5/6 User’s Guide A-23
NOTE:
If you have not previously configured the Access Point’s IP address
and do not have a DHCP server on the network, the Access Point
will default to an IP address of
169.254.128.132 .
2. Go to the DOS command prompt on your computer.
3. Type telnet <IP Address of the unit>.
4. Enter the CLI password (default is public).
NOTE:
Avaya recommends changing all default passwords immediately.
See the following sections for information on how to change the
default passwords:
— CLI password, see passwd .
— SNMP passwords (read, read-write, and SNMPv3
authentication and privacy), see SNMP Commands .
— HTTP password, see HTTP and HTTPS Commands .