Avaya AP-6 User Manual
Page 335
Recovery Procedures
Avaya Wireless AP-4/5/6 User’s Guide 7-19
Preparing to Download the AP Image
Before starting, you need to know the Access Point’s IP address, subnet
mask, the TFTP Server IP Address, and the AP Image file name. Make
sure the TFTP server is running and configured to point to the folder
containing the image to be downloaded.
Download Procedure
Follow these steps to use ScanTool to download a software image to an
Access Point with a missing image:
1. Download the latest software from
.
2. Copy the latest software updates to your TFTP server.
3. Launch ScanTool.
4. Highlight the entry for the AP you want to update and click
Change.
5. Set IP Address Type to Static.
NOTE:
You need to assign static IP information temporarily to the
Access Point since its DHCP client functionality is not available
when no image is installed on the device.
6. Enter an unused IP address that is valid on your network in the IP
Address field. You may need to contact your network
administrator to get this address.