Avaya AP-6 - Manual (Page 390)

DHCP Server Commands
A-44 Avaya Wireless AP-4/5/6 User’s Guide
NOTE:
You must have at least one entry in the DHCP Server IP Address
Pool Table before you can set the DHCP Server Status (dhcpstatus)
to Enable.
IP Address Pool Parameters
Name Type Values Access CLI Parameter
DHCP Server IP
Address Pool Table Table N/A R dhcpippooltbl
Table Index Integer User Defined N/A index
Start IP Address IpAddress User Defined RW startipaddr
End IP Address IpAddress User Defined RW endipaddr
Width Integer User Defined RW width
Default Lease Time
(optional) Integer32 3600–
86400 sec
(default)
RW defleasetm
Maximum Lease
Time (optional) Integer32 3600–
86400 sec
(default)
RW maxleasetm
Comment (optional) DisplayString User Defined RW cmt
Status (optional) Integer enable (1)
disable (2)
delete (3)
RW status