Avaya AP-6 - Manual (Page 389)

DHCP Server Commands
Avaya Wireless AP-4/5/6 User’s Guide A-43
DHCP Server Commands
!
CAUTION:
Before enabling DHCP server on the AP, confirm that the IP address
pools you have configured are valid addresses on the network and do not
overlap the addresses assigned by any other DHCP server on the net-
work. Enabling this feature with incorrect address pools will cause prob-
lems on your network.
DHCP Server Parameters
Name Type Values Access CLI Parameter
DHCP Server Group N/A R dhcp
DHCP Server
Status Integer enable (1) (default)
disable (2)
delete (3) RW dhcpstatus
Gateway IP
Address IpAddress User Defined RW dhcpgw
Primary DNS IP
Address IpAddress User Defined RW dhcppridnsipaddr
Secondary DNS IP
Address IpAddress User Defined RW dhcpsecdnsipaddr
Number of IP Pool
Table Entries Integer32 N/A R dhcpippooltblent