Avaya AP-6 - Manual (Page 99)

4
Avaya Wireless AP-4/5/6 User’s Guide 4-1
Advanced
Configuration
In This Chapter
• Configuring the AP Using the HTTP/HTTPS Interface
• System : Configure specific system information such as system name
and contact information.
• Network: Configure IP settings, DNS client, DHCP server, and Link
Integrity.
• Interfaces: Configure the Access Point’s interfaces: Wireless and
Ethernet. Also describes configuring a Wireless Distribution System
(WDS) .
• Management: Configure the Access Point’s management
Passwords, IP Access Table, and Services such as configuring
secure or restricted access to the AP via SNMPv3, HTTPS, CLI, or
Automatic Configuration .
• Filtering: Configure Ethernet Protocol filters, Static MAC Address
filters, Advanced filters, and Port filters.
• Alarms: Configure the Alarm (SNMP Trap) Groups, the Alarm Host
Table, and the Syslog features.
• Bridge: Configure the Spanning Tree Protocol, Storm Threshold
protection, Intra BSS traffic, and Packet Forwarding.
• Security: Configure security features such as MAC Access Control,
WPA, WEP Encryption, and 802.1x. Configure Rogue Access Point