Avaya AP-6 - Manual (Page 227)

Security
Avaya Wireless AP-4/5/6 User’s Guide 4-129
Interface's Configure > SSID/VLAN/Security Mode/Wireless A/B
screen and describes how each of these options correspond to the six
Security Modes listed above:
NOTE:
Before enabling the 802.1x, Mixed, or WPA mode, the 802.1x server
should be configured. Set the encryption key in Mixed mode after
the authentication is set to Mixed mode.
Authentication Mode
Setting Authentication
Method Employed Encryption Method
Employed
None None None or manually
configured Static WEP
settings
802.1x 802.1x Dynamic WEP Keying
Mixed 802.1x or None
(depends on a client's
configuration) Dynamic WEP Keying
or Static WEP
(depends on client's
configuration)
WPA 802.1x Dynamic TKIP Keying
WPA-PSK Manually configured
Pre-shared Key Dynamic TKIP Keying