Avaya AP-6 - Manual (Page 382)

CLI Commands
A-36 Avaya Wireless AP-4/5/6 User’s Guide
NOTE:
You may need to enable a disabled table entry before you can
change the entry’s elements.
show
Displays the value of the specified parameter, or displays all parameter
values of a specified group (parameter table). Groups contain Parameters
and Tables. Tables contain parameters for a series of similar entities.
To see a definition and syntax example, type only show and then press
the Enter key. To see a list of available parameters, enter a question mark
(?) after show (example: show ?).
Syntax
[Device-Name]> show <parameter>
[Device-Name]> show <group>
[Device-Name]> show <table>
Examples
[Device-Name]> show ipaddr
[Device-Name]> show network
[Device-Name]> show mgmtipaccesstbl