Avaya AP-6 - Manual (Page 436)

SpectraLink VoIP Commands
A-90 Avaya Wireless AP-4/5/6 User’s Guide
SpectraLink VoIP Commands
SpectraLink VoIP Parameters (802.11b and bg Modes Only)
These parameters enable or disable the SpectraLink Voice over IP
feature.
The Spectralink Legacy Support parameter should be enabled if the AP is
operating in 802.11bg mode and legacy 802.11 Spectralink telephones
are used. This parameter will set the basic rates of the AP to be 1 and 2
Mbps in 802.11bg mode and will allow old telephones that operate only at
the 1 and 2 Mbps basic rate to connect to the AP.
Name Type Values Access CLI Parameter
Spectralink VoIP Group N/A R spectralink
Spectralink VoIP
Status Integer enable
disable (default) RW speclinkstatus
Spectralink Legacy
Support Integer enable
disable (default) RW speclinklegacysupport