Avaya AP-6 - Manual (Page 294)

Logging into the HTTP Interface
6-2 Avaya Wireless AP-4/5/6 User’s Guide
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may
use your web browser to issue commands.
The Command Line Interface (CLI) also provides a method for issuing
commands using Telnet or a serial connection. This section covers only
use of the HTTP Interface. For more information about issuing commands
with the CLI, refer to
The Command Line Interface .
Follow these steps to view the available commands supported by the
AP’s HTTP interface:
1. Open a Web browser on a network computer.
NOTE:
The HTTP interface supports the following Web browser:
— Microsoft Internet Explorer 6 with Service Pack 1 or later
— Netscape 6.1 or later