Avaya AP-6 - Manual (Page 473)

VLAN/SSID Pair Commands
Avaya Wireless AP-4/5/6 User’s Guide A-127
Syntax Examples
Enable VLAN Management
[Device-Name]> set vlanstatus enable
[Device-Name]> set vlanmgmtid <1-4094>
[Device-Name]> show vlandidtbl (to review your settings)
[Device-Name]> reboot 0
Disable VLAN Management
[Device-Name]> set vlanstatus disable or
[Device-Name]> set vlanmgmtid 0
[Device-Name]> reboot 0
Add an Entry to the VLAN ID Table
[Device-Name]> set vlanidtbl <index number; see table> id
<1-4094, -1=untagged> ssid <enter network name>
[Device-Name]> show vlandidtbl (to review your settings)
[Device-Name]> reboot 0
NOTE:
Sixteen VLAN/SSID pairs are available for the AP-6, and APs that
have an 802.11a/b/g or 802.11b/g Upgrade Kit installed. The AP-5
and AP-4 support only one VLAN/SSID pair.