Avaya AP-6 - Manual (Page 215)

Bridge
Avaya Wireless AP-4/5/6 User’s Guide 4-117
Configuring Interfaces for Packet Forwarding
Configure your AP to forward packets by specifying interface port(s) to
which packets are redirected and a destination MAC address.
1. Within the Packet Forwarding Configuration screen, check the
box labeled Enable Packet Forwarding.
2. Specify a destination Packet Forwarding MAC Address. The AP
will redirect all unicast, multicast, and broadcast packets received
from wireless clients to the address you specify.
3. Select a Packet Forwarding Interface Port from the drop-down
menu. You can redirect traffic to:
— Ethernet
— A WDS connection (see Wireless Distribution System (WDS)
for details)
— Any (traffic is redirected to a port based on the bridge learning
process)
4. Click OK to save your changes.