Avaya AP-6 - Manual (Page 239)

Configure Multiple SSID/VLAN/Security Mode Entries
Avaya Wireless AP-4/5/6 User’s Guide 4-141
b. Enter a Network Name (SSID), between 2 and 31 characters,
in the field provided. This parameter is mandatory.
c. Enter a VLAN ID in the field provided. This parameter is
mandatory.
— You must specify a unique VLAN ID for each SSID on the
interface. As defined by the 802.1Q standard, a VLAN ID
is a number between 1 and 4094. A value of -1 means
that an entry is untagged.
— You can set the VLAN ID to -1 or untagged if you do not
want clients that are using a specific SSID to be
members of a VLAN workgroup. Only one “untagged”
VLAN ID is allowed per interface.
— The VLAN ID must match an ID used by your network;
contact your network administrator if you need
assistance defining the VLAN IDs.
d. Select the security mode for the SSID/VLAN entry and
configure the security mode parameters according to one of
the following procedures:
— Enable WEP Encryption
— Enable 802.1x Security
— Enable Mixed Mode (802.1x and WEP Encryption)
— Enable WPA Mode
— Enable WPA-PSK Mode