Avaya AP-6 - Manual (Page 193)

Filtering
Avaya Wireless AP-4/5/6 User’s Guide 4-95
Adding TCP/UDP Port Filters
1. Place a check mark in the box labeled Enable TCP/UDP Port
Filtering.
2. Click Add under the TCP/UDP Port Filter Table heading.
3. In the TCP/UDP Port Filter Table, enter the Protocol Names to
filter.
4. Set the destination Port Number (a value between 1 and 65535) to
filter. See the IANA Web site at
http://www.iana.org/assignments/port-numbers for a list of
assigned port numbers and their descriptions.
5. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).
6. Set the Interface to filter:
— Wireless
— Ethernet
— All interfaces
— No interfaces
7. Click OK.