Vaisala HMT330 - Manual (Page 32)

User's Guide _______________________________________________________________________
30 ___________________________________________________________________ M210566EN-K
Mounting with DIN Rail Installation Kit
DIN rail installation kit includes a wall mounting kit, 2 clip-fasteners and
2 screws M4 × 10 DIN 7985 (Vaisala order code: 215094).
1. Attach two spring holders to the plastic mounting plate by using the
screws provided in the installation kit.
2. Attach the HMT330 to the plastic mounting plate with 4 screws
(provided).
3. Press the transmitter onto the DIN rail so that the clip-fasteners
snap into the rail.
0503-002
Figure 10 Mounting with the DIN Rail Installation Kit
Pole Installation with Installation Kit for
Pole or Pipeline
Installation kit for pole or pipeline (Vaisala order code: 215108) includes
the metal mounting plate and 4 mounting nuts for pole mounting. When
mounting, the arrow in the metal mounting plate must point upward; see
Figure 13 on page 31.
0503-006
Figure 11 Vertical Pole
The following numbers refer to Figure 11 above:
1 = Fixing brackets (2 pcs) M8 (provided) for 30 ... 102 mm poles
2 = Mounting nuts M8 (4 pcs)