General instructions for probes with a cable, Figure 23, Horizontal mounting of probe – Vaisala HMT330 User Manual
Page 43
Advertising
Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 41
General Instructions for Probes with a
Cable
Mount the probes with a cable horizontally; this way, any water
condensing on the tube cannot flow onto the sensor.
0507-024
Figure 23
Horizontal Mounting of Probe
The following numbers refer to Figure 23 above:
1 = To be sealed
2 = To be insulated
3 = Insulate the cable
4 = Let the cable hang loosely. This prevents condensed water
running to the probe along the cable.
Advertising