H-1. swagelok, H-2. front and back swagelok, H-2. dimensions and part numbers for swagelok – Campbell Scientific AP200 CO2/H2O Atmospheric Profile System User Manual
Page 107: Inserts .................... h-3, H-3. dimensions and part numbers for swagelok, Ferrules .................. h-3
Appendix H. Using Swagelok
®
Fittings
FIGURE H-1. Swagelok
®
insert
TABLE H-2. Dimensions and Part Numbers for Swagelok
®
Inserts
Tubing OD (in)
Tubing ID (in)
Swagelok
®
pn
CSI pn
1/4
1/8
B-405-2
15834
1/4
0.17
B-405-170
15830
1/4
3/16
B-405-3
15713
3/8
1/4
B-605-4
9845
1/2
3/8
B-815-6
17380
5/8
1/2
B-1015-8
19495
Ferrules
Each Swagelok
®
fitting comes assembled with the front and back ferrules
included. These ferrules are permanently swaged onto the tubing at the first
assembly, so spare ferrules may be needed for replacing the ends of tubing.
Back ferrule
Front ferrule
FIGURE H-2. Front and back Swagelok
®
ferrules
TABLE H-3. Dimensions and Part Numbers for Swagelok
®
Ferrules
Tubing OD (in)
Swagelok
®
pn (front/back)
CSI pn (1 set)
1/8
B-203-1/B-204-1
N/A
1/4
B-403-1/B-404-1
15890
3/8
B-603-1/B-604-1
15889
1/2
B-813-1/B-814-1
N/A
5/8
B-1013-1/B-1014-1
N/A
H-3